NO JOB TOO BIG. NO JOB TOO SMALL

Your one-stop-shop rubber agent

Our products are environmentally friendly with 0% HAPS and 0% VOC, and their adhesion properties cannot be matched.The ‘Metal Roof Coat Rubber’ has an insulation attribute that can insulate metal roofs against both the heat and cold. Our ‘Two Component Spray on Rubber’ has a unique elasticity. With our B-Earth series we can even treat asbestos roofs for sealing and strengthening.

Coating for Metal Roof

Waterproofing and insulation coatings for metal roofs are special water proof coatings for metal structures, produced from imported acrylate, silane elasticity of copolymerization emulsion, adding auxiliaries and UV reflective materials. This water proof system has good properties like UV reflection, fatigue resistance, anti-aging, and resistance to low temperature. This product can lower indoor temperatures to meet the needs of waterproofing and energy-saving.

Characters
  • Water-based emulsion, non-toxic and harmless, environmental friendly product.
  • With better film elongation, this product can adapt to base shrinkage and crack deformation.
  • Cold construction, colour additives can be added; Easy to construct and maintain.
  • Good metal adhesion, will not afford a drum and fall.

Metal roofs renovation In large areas

Experience dictates that one needs to do an overall renovation for metal roofs every 8-10 years. This allows one to avoid changing your roof because of aging problems. Metal roof renovation includes waterproofing in roofs, anti-corrosion, rust protection, and insulation.

Two-component Spray Rubber Waterproof Coating

This coating is made by mixing together two components. Components A and B react when mixed together, and after this the mixture becomes a higher property, waterproofing and anti-leaking film. This product is applied using a special spray machine with high speed to film, easy to apply on construction sites. The material is an environmentally friendly product and meets environmental requirements.en spraying in short time. Thickness can reach 4mm. The spray machine can better increase construction rates and save people resources and costs, greatly decreases construction time. Two spray guns can be added to this machine and the work area can be more than 1000SM per day.

Methods

A special spraying machine should be used for this rubber waterproofing coating

According to the ratio, components A and B meet outside the spray gun and films on the base surface through fast chemical reactions and turns into a layer of dense film.

The film can cover the bases totally and perfectly to reach the joints. This is called “skin type” waterproofing.

Temperature resistance: this product can meet low and high temperature requests in different areas.

Higher work rate: quickly films when spraying in short time. Thickness can reach 4mm. The spray machine can better increase construction rates and save people resources and costs, greatly decreases construction time. Two spray guns can be added to this machine and the work area can be more than 1000SM per day.

B-Seal

B-Seal is a water bond, ready to apply elastic waterproofing sealant for filling and sealing cracks and joints in metal, concrete and wood surfaces, which prevents water penetration. When cured, it forms a tough, highly durable, flexible seal that has ultimate protection properties and can tolerate thermal shrinkage movements of the substrates.

Characters

It is ideal for application to metal roofs, parapets, dams, gutters, down pipes, concrete roofs, pre-cast panel walls, glazing, etc.

  • Fast drying, excellent water resistance properties.
  • Excellent movement tolerance.
  • Stain resistance.
  • Impact resistance.
  • Cures to form an elastic seal.
  • High fire resistance.
  • Excellent in sealing cracks and joints.
Technical Data

Storage conditions

  • Room (moderate) temperature, tightly closed (sealed)
  • Creamy (wet) and clear or light grey (dry)
  • Ultra Violet resistance
  • Excellent
  • Chemical resistance
  • Excellent
  • Water resistance
  • Excellent
  • Hardening resistance
  • Excellent
  • Drying time
    30 minutes (touch dry) 7 days (full cure)

B-Concrete Seal

B-Concrete Seal is a highly acrylic water bond, low viscosity, and penetrating primer or undercoat. It reacts with substrates to ensure better adhesion with excellent impact resistant properties on all surfaces. B- Concrete Sealer is suitable for application over old and new concrete, slates, bricks, plaster and roof tiles. Advantages of the product include:

Characters
  • Deep penetration.
  • Fast drying, excellent water resistance property.
  • Waterproofing properties.
  • High fire and heat resistance.
  • Reduce rapid evaporation. Concrete cures uniformly.
  • Non-toxic and odourless
  • Corrosion resistance.
  • Protects surface against efflorescence.
  • Ultraviolet, heat and stain resistant.
  • Does not change colour with age.
  • Good adhesion and flexibility.
  • Re-sealable, can be re-sealed without removing first coat.
Technical Data

Storage conditions
Room (moderate) temperature, tightly closed (sealed)
Colour (wet)
Milky
Solid (%) by volume
35%
Gloss
Semi sheen
Water resistance
Excellent
Spreading rate
10 to 15 m2 per litre at dried film thickness of 18 microns depending on the substrate

B-Bond

B-bond is a highly acrylic water bond penetrating primer or undercoat that has excellent flexibility and impact resistant properties on all surfaces it’s applied to. B-Bond is suitable for application over old and new concrete, slates, bricks, plaster, asbestos, roof tiles, hard boards, chip boards; aluminium galvanized steel, painted areas, etc.

Characters
  • Deep penetration allows the primer to gain a tough durable grip on the surface it’s applied to, creating a long-lasting quality coating.
  • Low viscosity
  • Waterproofing properties.
  • Excellent permeability.
  • Excellent adhesion of Ultralast product.
  • The Bond has a high fire and heat resistance level.
  • No chipping or scaling.
  • Non-toxic: great for the families, the applicators and the environment.
  • Odourless on application: People can move in and out of the painting environment with no upset due to toxic smell; pets are safe.
  • Corrosion resistance.
  • Ultra Violet resistance.
  • The Bond has a resistance to fungus and chemical substances such as acid, alkaline, etc.
Technical Data

Storage conditions

  • Room (moderate) temperature, tightly closed (sealed)
  • Colour (wet)
  • Milky
  • Solid (%) by volume
  • 18%
  • Gloss
  • Slightly sheen
  • Water resistance
  • Excellent
  • Spreading rate
  • 12 to 15m2 per litre at dried film thickness of 18 microns

B-Clean

B-Clean is a water-based multi purpose cleaner and degreaser for application to metallic and porous substrates such as concrete, wood, gypsum board and plaster, as well as ferrous and non-ferrous surfaces such as aluminium and intact galvanising. Can also be used to remove algae, stains from baths, cement from bricks, etc.

Technical Data

Not recommended for use on fabric material unless tested. An additional advantage is the absence of toxic fumes during application.

Colour
Opaque
Solvent
Water
Thinner
Must not be thinned
Solids (%) by mass
15.4%
Solids (%) by volume
Minimum 3% – 1%
Pigments
Nil
Flash point
Waterborne and not flammable
Shelf life
2 years +

B-Treat

B-Treat is formulated with an excellent rust-block additive that protects all types of metal against corrosion. The product is ideal for areas such as metal, rolled steel, mild steel, stainless.

Characters
  • Deep penetration into the substrate.
  • Waterproofing properties.
  • Excellent permeability.
  • Good adhesion of the Ultra-Paint product.
  • The Ultra-Treat has a high fire and heat resistance.
  • No chipping or scaling.
  • The Ultra-Treat is Non-toxic and odourless.
  • Corrosion resistance.
  • Ultra Violet resistance.
  • Fungus and chemical substance resistance, e.g. acid, alkaline, etc.
  • Creep resistant.
Technical Data

Storage conditions
Room (moderate) temperature, tightly closed (sealed)
Colours
Black, brown, green and red
Solid (%) by volume
47%
Gloss
Slight sheen
Water resistance
Excellent
Abrasion resistance
Good
Corrosion resistance
Good
Spreading rate
8 to 10 m2 per litre at dried film thickness of 56 microns

B-Paint

B-Paint acts as a one-way membrane, allowing moisture to escape to the surface but prevents moisture ingress into the treated substrate.

Characters
  • A high degree of elasticity, so it won’t chip or crack
  • Excellent adhesion capabilities to all surfaces.
  • Colour fastness: won’t fade
    Natural pigments that won’t fade with time
  • Natural Fungi retardant
    Heat and flame resistant to 196° F
  • No hardening or deterioration with age.
  • An aggressive scrubbing endurance; paint is hardy and extremely durable
  • Non-toxic: great for the families, the applicators and the environment
  • Odourless on application: people can move in and out of the painting environment with no upset due to toxic smell. Pets are safe
  • Immediate occupancy of painted premises due to odourlessness.

The B-Paint product is a textured paint that can be used as an acoustic sound absorber on walls and ceilings. Although it is typically applied as a decorative finish on walls, it is ideal for obscuring building defects over a prolonged period of time.

Anecdotal evidence includes:

  • A 14-year-old sample of dried paint remains pliable and elastic
  • A church painted white 30 years ago (in South Africa) still appears white. (i.e. no yellowing with age)
  • Colour fastness for more than 70,000 hours
  • Building painted with Ultra-Paint between 5° and 7° cooler.
Technical Data

Storage conditions
Room (moderate) temperature, tightly closed (sealed)
Shelf life
7 years +
Temperature tolerance
-50°C to 196°C
Physical form
Liquid
Minimum application temp.
5°C

B-Thatch

B-Thatch is a water bond acrylic membrane that is formulated in a variety of colours and provides sealing and fire retardant qualities.

Characters

B-Thatch is used to delay the normal thatch or brush fencing rotting process and subsequently lengthens the life of the roof or fence. It also keeps the thatch sturdy and prevents birds from pulling out thatch.  If sprayed on the inside it prevents dust rains in the house. B-Thatch waterproofs the roof, which will reduce the weight of the roof. It also eliminates the required frequent brushing and re thatching of roofs.

  • Ultraviolet and stain resistant.
  • Does not turn yellowish with age
  • Good adhesion and flexibility
  • Non-toxic and odour free.
Technical Data

Storage
Keep containers well sealed at moderate temperatures.
Clean up
Clean all equipment thoroughly with water immediately after use.
Colours
Antique, New Thatch, Camouflage, Natural or in desirable colour
Solids (% by volume)
70% ± 1-2%
Gloss
Semi-gloss
Spreading rate
650 – 1000 ml/m2

B-Varnish

B-Varnish is a water bond acrylic, electrometric membrane that is formulated as a clear product and which provides superb sealing qualities.

Characters

It penetrates deep into the surface and reduces oil, grease, acids, and alkalis seeping into the surface and causing deterioration. The acrylic resin enables it to bridge hair line and minor cracks within the substrate. It also keeps dust down and forms a durable waterproofed surface, which is chemical and abrasion resistant. B-Varnish is used alone as waterproofing coating where the natural colour is to be preserved, such as face brick, wooden doors and window frames, roof tiles, stones, etc. Furthermore, it could also be used as reinforcement to fibreglass to gain maximum benefit.

  • Protects surface against efflorescence.
  • Ultraviolet, heat and stain resistant.
  • Does not turn yellowish with age
  • Good adhesion and flexibility
  • Non-toxic and odour free.
Technical Data

Storage
Keep containers well sealed at moderate temperatures.
Clean up
Clean all equipment thoroughly with water immediately after use.
Colours
Wet – Milky colour. Dry – Transparent or colour of choice
Solids (% by volume)
51% – 1%
Gloss
Semi-gloss
Spreading rate
10 – 15 m2 per litre (1 coat depending on substrate)

B-Road

B-Road is a pure acrylic emulsion paint for application to tar/bitumen and concrete roads.

Characters
  • Low Volatile Organic Compounds (VOC), which ensure long lasting paint with less frequent application and no noxious fumes or odours during application.
  • Quick drying and low dirt pick up. Will not flake and deteriorate like conventional paint.
  • Supplied ready for brush/roller/spray application
  • Excellent adhesion properties, which will maintain its sheen
  • Excellent glass bead retention
  • Drying time is 3 to 5 minutes at 21°C.
Technical Data

Clean up
Clean all equipment thoroughly with water immediately after use.
Colours
White, yellow and red with sheen finish, and black with matt finish. Any colour really
Thinners
Must not be thinned
Solids
Approximately 65% by mass
Flash point
Not flammable
Shelf life
Minimum 2 years +

The normal spreading rate for B-Road is 1 m2/litre at 25 micrometers Dry Film Thickness (DFT) on a smooth surface. However, a practical calculation is required for separate substrates.

B-Rubberguard

B-Rubberguard is a UV resistant, acrylic based rubberising compound for corrosion protection and moderate abrasion applications. The coating can be applied up to 6 mm thick. Materials are water based and non-toxic. No noxious fumes during painting and no need for solvents.

Technical Data

Multiple coats can be applied on the same day if higher dry film thickness is required. Not recommended for use on substrates that are permanently submerged in water.

Colour
Black plus a limited range of colours
Vehicle type
Acrylic
Solvent
Water
Thinner
Must not be thinned
Specific gravity
1.1
% Solids by mass
56%
Fire index (SABS 0177-11I)
Class 3
Finish
Textured matt
Pigments
Rubber, organic pigments
Cleaner
Water
Flash point
Not flammable
Viscosity
Semi past consistency
% Solids by volume
59% minimum
Pot/shelf life
7 days/3 months

B-Screed

B-Screed is an acrylic-based floor screed for high impact areas. The product’s principal characteristic is to build high films that cover irregular surfaces. Similar to the other B products, B-Screed has good waterproofing qualities, excellent abrasion resistance ideal for vibrating structures, and is nontoxic with negligible hazardous air pollutants.

Technical Data

Storage and application requirements
See the Ultra-Clean product specifications
Colour
Any
Finish
Matt
Solvent
Water
Thinner
Must not be thinned
Solids (%) by mass
Minimum 90%
Solids (%) by volume
Minimum 95%
Flash point
Waterborne and not flammable
Shelf and pot life
2 years +
Thickness
Minimum of 1 mm
Drying time (at 20°C and 1 µm)
Touch dry (30 minutes) Full cure (24 hours)
Spreading rate
2 litres per m2 at 2 mm thickness

Call us

012 567 4625 or 072 794 8534

Email us

dudley@rubber-it.co.za
info@rubber-it.co.za

Visit us

121 Pafuri Avenue,
Sinoville,
Pretoria,
South Africa.

Contact Us Today!